Safety shoes can be divided into many kinds according to their different functions. The sole is generally made of polyurethane material, which has the advantages of oil resistance, wear resistance, acid and alkali resistance, insulation, water resistance and portability. Wear - resistant than ordinary rubber bottom 2-3 times. Light weight, good softness, the weight is only 50%-60% of the rubber bottom.

The following is a detailed introduction of various safety shoes:

Anti-static safety shoes: can eliminate the accumulation of static electricity, suitable for flammable work places, such as gas station operators, liquefied gas filling workers, etc. Note: Do not use as insulating shoes; Wear anti-static shoes should not wear insulating wool socks or use insulating insoles; Anti-static shoes should be used with anti-static clothing at the same time; Anti - static shoes generally not more than 200 hours should be shoe resistance value test once, if the resistance is not within the specified range, it can not be used as anti - static shoes.

Toe protection safety shoes: the safety of the inner cap can be AN1 grade, suitable for metallurgy, mining, forestry, port, loading and unloading, quarrying, machinery, construction, petroleum, chemical industry and so on.
 

Acid and alkali resistant safety shoes: suitable for electroplating workers, pickling workers, electrolysis workers, liquid workers, chemical operators, etc. Note: acid and alkali resistant leather shoes can only be applied to the general concentration of low acid and alkali work place; Should avoid contact with high temperature, sharp damage vamp or sole leakage; After wearing, the acid and alkali liquid on the shoes should be rinsed with water, and then dried. Avoid direct sunlight or drying.

Anti-smashing safety shoes: the anti-piercing strength is 1 level, suitable for mining, fire, construction, forestry, cold work, machinery industry, etc.

Electric insulating shoes: suitable for electricians, electronic operators, cable installers, substation installers, etc. Note: suitable for the working environment with power frequency voltage below 1KV, the working environment should be able to keep the vamp dry. Avoid contact with sharp tools, high temperature and corrosive substances, and avoid corrosion damage at the bottom.

Customers can choose a suitable safety shoe according to their own working environment.