• Welcome to TOVAC
  • Have any question? +86-769-23187408
  • Working Hours
  • All day

Composite Toe Vs. Steel Toe Boots: Understanding Protective Footwear



On many jobsites and in many facilities, safety-toe footwear is a must. According to OSHA, employees must wear protective footwear when working in areas where there is a danger of foot injuries due to falling or rolling objects. 

Steel-toe boots are a traditional choice, but there are other nonmetallic options, including composite-toe boots, which have protective toe caps made of plastic, carbon fiber or other strong synthetic materials. So how do you decide between composite toe vs. steel toe boots?

Composite Toe vs. Steel Toe: Protection

First, let’s look at the most important issue: protection.

Safety footwear manufacturers test and rate their shoes and boots according to standards developed by ASTM International. For footwear with a protective toe cap, the relevant standards are ASTM F2412 (Standard Test Methods for Foot Protection) and ASTM F2413 (Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear). ASTM F2413 specifies that the toe cap must be tested to withstand impact and compression. Impact and compression resistance are determined by following the test methods spelled out in ASTM F2412.

  • Impact testing looks at what happens when something heavy falls on the shoe.
  • Compression testing looks at what happens when something heavy rolls onto the shoe.

Since all safety-toe footwear must pass the same kinds of impact and compression tests, the bottom line is this:

In ASTM-compliant safety-toe footwear, the toe cap will offer a sufficient level of protection, whether it’s made of steel or composite material.

ASTM-compliant safety footwear is marked with a code that specifies which hazards the footwear has been tested against. In addition to the impact and compression testing, there are tests of protection against electrical shock, punctures and other hazards. Learn more about ASTM F2413 and decoding safety toe footwear labels here.

Composite vs. Steel Toe: Comfort

Once protection and compliance are taken care of, comfort becomes a major consideration.

Here, the weight of the shoe or boot is an issue. According to Safety + Health magazine, steel toe caps are heavier than composite toe caps. But how much does that matter? Skeptics may tell you that the weight of the toe cap itself is only a small portion of a boot’s total weight. Others will point out that for workers who are on their feet all day, even a small difference in weight can contribute to fatigue. Ultimately, comfort is subjective, and personal preferences come into play.

The Importance of Good Fit

When it comes to comfort, don’t forget fit. The best “comfortable” work boots are often going to be the best fitting work boots. Here, it’s less a question of steel-toe boots vs. composite-toe boots and more a question of how an individual pair accommodates your feet.

According to ISHN, too-tight footwear can lead to in-grown toenails, blisters, corns and other ailments—and it’s a bad idea to buy tight safety-toe boots with the idea that they’ll “break in,” because the protective toe can’t stretch and conform to the shape of your foot in the way that leather can. To make sure your boots won’t be too tight, ISHN recommends these tips for finding the best comfortable work boots:

  • When you try on the work boots, wear the same kind of socks that you wear on the job.
  • Try on the boots in the afternoon or evening, because your feet tend to swell over the course of the day, and you want them to be at their largest when you fit-test a new pair.

And don’t forget to consider the size and shape of the boot itself. Here, the toe cap material can make a real difference. Composite toe caps need to be somewhat thicker than their steel counterparts to offer a similar level of protection, and this can make the shoe or boot seem larger and more bulbous, changing how the footwear feels, according to Occupational Health & Safety.

Are Composite-Toe Boots Better in Cold Weather?

If you’re looking for comfortable winter shoes for work, you need footwear that can handle cold weather well—and some people will tell you that composite toes are better in the cold than steel toes.

This makes sense in theory: metal is a good thermal conductor, which means that a cold piece of metal in your boot would allow the heat from your warm foot to escape to the colder environment, making your foot feel colder. Meanwhile, plastic—which is what many composite toes are made of—is a good thermal insulator that less readily transfers heat, according to the Department of Physics at the University of Illinois at Urbana-Champaign.

Security-Friendly Footwear

There’s one area where composite-toe boots have a clear edge over their steel-toe counterparts: if you have to pass through a metal detector at work, steel-toe boots will set it off.

However, not all composite-toe boots are metal detector friendly, according to one manufacturer, because they may still include a steel shank. So, if your work requires you to pass through a metal detector, you’ll need completely non-metallic shoes and boots. Passing through security is not going to be a problem for most people at their jobs, but this might be the one case where steel-toe boots vs. composite-toe boots has a clear winner.

Get In Tohch


Recommend Read

  • Why You Need Comfortable Work Boot?

    Why You Need Comfortable Work Boot?


    Safety boots are protective, but they don't always provide enough support and comfort for workers. And when you’re spending all day in these boots, you want to make sure they feel good and fit you well. Uncomfortable footwear (and the resul

  • STEEL TOE CAP VS COMPOSITE TOE CAP

    STEEL TOE CAP VS COMPOSITE TOE CAP


    Steel Toe Caps Safety boots with steel toe caps contain a piece of steel in the toe area to protect the toes from a number of different hazards in the workplace. Steel toe caps meet the standard European safety specifications of a

  • How can the right safety shoes help prevent slips, trips, and falls?

    How can the right safety shoes help prevent slips, trips, and falls?


    People often ask:How can the right safety shoes help prevent slips, trips, and falls? Wearing the wrong footwear can increase your chances of slipping or tripping. Injuries due to slips, trips, and falls cost the US billions of dollars each year a

  • How long should my work boots last?

    How long should my work boots last?


    Your work boots could last anywhere between several months and several years. It all depends on a number of factors: The quality of your work boots The material they're made from The distance you walk in them The

  • Shoe Shank: Everything You Need To Know

    Shoe Shank: Everything You Need To Know


     Shoe Shank: Everything You Need To Know Shoe shank are what keep your work boots in shape, as they stiffen the outsoles to give you a stable platform. They’re tucked into the interiors, located above the outer soles at the waist (or ce

  • Composite Toe Vs. Steel Toe Boots: Understanding Protective Footwear

    Composite Toe Vs. Steel Toe Boots: Understanding Protective Footwear


    On many jobsites and in many facilities, safety-toe footwear is a must. According to OSHA, employees must wear protective footwear when working in areas where there is a danger of foot injuries due to falling or rolling objects.  St

  • How to choose the toe cap for safety shoes correctly?

    How to choose the toe cap for safety shoes correctly?


    Soft safety toes are available on the market, but they don't meet the impact and compression requirements that are required for steel, aluminum, and composite toe cap. Selecting the Right Safety Toe cap The type of safety toe you need is go

  • Why wear safety shoes or boots?

    Why wear safety shoes or boots?


    It'd appear like a rhetorical question, but there are numerous reasons why you may pick out or need to wear safety shoes or boots. often a staple of your workwear wardrobe, they’re a sensible and inexpensive manner to prevent harm in additi

  • Steel toe cap boots defined

    Steel toe cap boots defined


    Steel toe cap work shoes and boots are designed to shield your feet from being crushed by falling items or from being punctured through sharp gadgets. Additionally called a safety boot, metal-capped boot or safety shoe, the steel-toe boot is a lon

  • What is the Difference? Steel Toe Cap vs Composite Toe Cap Boots

    What is the Difference? Steel Toe Cap vs Composite Toe Cap Boots


    In times long gone with the aid of, the steel toe cap boot was the king of safety footwear, offering protection on creation sites and other industrial settings. then alongside got here a new child on the block – the composite toe cap boot. our